Biodiesel Fuel Explained

662
Biodiesel Fuel Simply Explained

What biodiesel is?

Biodiesel is a clean burning alternative fuel, produced from domestically grown, renewable resources which contains no petroleum products, but can be blended at any concentration with diesel from fossil sources to create a biodiesel blend. It can be used in compression-ignition (diesel) engines with little or no modification.

It is simple to use, biodegradable, non-toxic, and basically free of Sulphur compounds and aromatics.

When Rudolf Diesel designed his prototype diesel engine a century ago, he ran it on peanut oil. He planned that diesel engines would operate on a variety of vegetable oils. But when petroleum diesel fuel arrived on the marketplace, it was cheap, reasonably efficient, and readily available, and therefore quickly became the diesel fuel of choice.

This alternative fuel is made in a chemical process called transesterification, where organically derived oils (vegetable oils, animal fats and recycled restaurant greases) are combined with alcohol (usually methanol) and chemically altered to form fatty esters such as methyl ester.

The biomass-derived esters can be blended with conventional diesel fuel or used as a neat fuel (100% biodiesel). The process results in two products — methyl esters (the chemical name for biodiesel) and glycerine (a valuable by-product usually sold for use in the production of soap).

Biodiesel as an alternative fuel

This biofuel is the only alternative fuel for motor vehicles up to now (2004) to have fully completed the health effects testing requirements of the 1990 Clean Air Act Amendments. Raw vegetable oil cannot meet biodiesel fuel specifications, it is not registered with the EPA, and it is not a legal motor fuel, despite widespread use in many areas.

To express it more exactly: Biodiesel is defined as mono-alkyl esters of long-chain fatty acids derived from vegetable oils or animal fats, conforming to ASTM D6751 specifications for use in diesel engines only in US.

It refers to the pure fuel before blending with diesel fuel and  is less damaging to the environment because it is made from renewable resources and has lower emissions compared to fossil diesel. The toxic effects are even less than from table salt and it biodegrades as fast as sugar when spilled. Since it is made from renewable resources such as rape seeds or similar oil plants, its use decreases dependence on imported oil, whilst contributing to the local rural economy.

Increased utilization of renewable biofuels can result in measurable micro-economic benefits for both the industrial and agricultural sectors as well as positively affecting the balance of trade. A study completed in 2001 by the U.S. Department of Agriculture states that an annual increase by the equivalent of 760 million liters of soy-based biodiesel demand would boost the total cash receipts from crops by USD5.2 billion cumulatively by 2010, leading to an average farm income increase of USD300 million per year net over this period. In addition to being a domestically produced, renewable alternative fuel for diesel engines, this biofuel has positive performance attributes such as increased cetane number, high fuel lubricating value and high oxygen content.

Biodiesel is one of the most tested alternative fuels on the market

Biodiesel is one of the most rigorously tested alternative fuels on the market. A number of independent studies have been completed with the results showing biodiesel performs as well as fossil diesel whilst causing much less damage to the environment and human health compared to diesel.

That research includes studies performed by the U.S. Department of Agriculture, U.S. Department of Energy, Stanadyne Automotive Corp., Lovelace Respiratory Research Institute, and Southwest Research Institute. Biodiesel is the first and, up to now, the only alternative fuel to have completed the rigorous Health Effects testing requirements of the Clean Air Act.

Biodiesel has been shown to perform similarly to diesel in more than 80 million successful road kilometers, using virtually all types of diesel engines, a great deal of off-road distance and countless marine hours. There are now more than 300 major fleets use the fuel in the US alone.

Pure biodiesel (B100) has a solvent effect, which may well release deposits accumulated on tank walls and in pipes from operation. It will also attack paint and similar surfaces, given the chance. Using high blends of  biodiesel, the release of deposits may clog filters initially and care should be taken to replace fuel filters until the build-up of deposits is eliminated. This issue is less of a problem with B20 blends, and there is no evidence that lower-blend levels such as B2 have caused filters to become blocked.

B20 and B2 refer to the American system of designating the percentage of biodiesel in a blend. B20 contains 20 % biodiesel and B2 contains 2 % biodiesel by volume. The rest will consist of standard fossil diesel fuel.

The recent switch to low-Sulphur diesel fuel has caused most OEMs to switch to components that are also suitable for use with biodiesel. In general, biodiesel used in pure form can soften and degrade certain types of elastomers and natural rubber compounds relatively quickly. These were commonly used in engines up to a few years ago, so there may be a compatibility issue with older vehicles. Using high percentage blends can impact fuel system components (primarily fuel hoses and fuel pump seals) that contain elastomer compounds incompatible with biodiesel, although the effect is lessened as the biodiesel blend level is decreased.

Experience has shown that no changes to gaskets or hoses are necessary when using B20, even in older engines because  is used in federal, state, and transit fleets, private truck companies, ferries, to tourist boats and launches, locomotives, power generators, home heating furnaces, and other equipment, especially in the agricultural sector.

Furthermore, there is growing interest in using biodiesel where workers and school children are exposed to toxic diesel exhaust, in aircraft to control local pollution near airports, and in locomotives and power generators that face restricted use unless emissions can be reduced. One example could be Eastman Chemical Co. of Kingsport, Tennessee, who has switched all 200 delivery vehicles over to biodiesel B20 use.

LEAVE A REPLY

Please enter your comment!
Please enter your name here